Agile™ - Mounting to Floor/Wall

While the Model 52 does not come with a floor or wall mounting kit, it has pre-drilled holes on all sides except the front: 

• Four (4) holes on the top 
• Four (4) holes on the bottom
• Four (4) holes on the rear
• Six (6) holes on either side

When mounting, we recommend using 1/4", material-specific hardware (depending on what you are fastening the cabinet to)

The top/bottom mounting holes can also be used to stack another Agile 52, or the Agile 40 on top of each other, or to bolt them together side-by-side.

If you have any further questions about installation or mounting, please Contact Us Here