Fast Box Mobile Strap Installation

1) Unlock and open the door, then remove the foam pad

2) Press the plastic tabs on the side release buckles to separate the male and female straps

3) With the female strap:

1. Move the tri-glide buckle 4” away from the female end of the side release buckle
2. With the female side release buckle facing towards you, feed the end of the strap from the back to the front through the metal tab in the back of the drawer
3. Feed the end of the strap through the bottom side of the tri-glide buckle and pull tight

4) With the male strap:

1. Hold the male side of the side release buckle facing away from you and the tri-glide buckle facing up. Remove the bottom strap from the tri-glide buckle
2. Slide the tri-glide buckle 6” from the end of the top strap, then slide the male side release buckle 2” away from the tri-glide buckle
3. With the male side release buckle facing away from you, feed the end of the bottom strap from the back to the front through the metal tab in the front of the drawer
4. Feed the end of the strap through the bottom side of the tri-glide buckle and pull tight

5) Repeat steps 3 and 4 with the second set of straps on the other set of metal tabs

6) Install the foam pad on the bottom of the drawer and pull the male and female ends of the side release buckles through the cutouts on the foam pad

Note: The length of the straps can be adjusted to accommodate different-sized firearms by adjusting the tri-glide buckles.